LF 10/6
Nr. 63
| Type of vehicle: | ATEGO 1218 |
| Manufacturer: | Mercedes-Benz |
| Year of Construction: | 2004 |
| Engine Output KW (HP): | 132 (180) |
| Permissible Maximum Weight (t): | 12.00 |
| Driven Axles: | 4x2 |
| Occupants: | 1+8 |
| Drive: | Road |
| Fuel: | Diesel |
| Firefighting Technical Equipment: | • Brand new crew cabin (hydraulic tilt cabin) for 1+8 occupants • Brand new equipment case, made of aluminium with accessible roof, side planking and fold-away ladder at the rear • 5 equipment rooms with aluminium roller blinds • Adjustable shelves in all equipment rooms • The body is lowered before and behind the rear axle, with 4 flaps, which can be used as steps • Storages for standard equipment LF 10/6 • Equipment room lighting with LANGFELD lamps • Power socket 24 Volt • Storage for portable pump TS 8/8 • Storage for SCBA at the body on telescopic rotary drawer • Water tank made of GFRP (Glass Fiber Reinforced Polymer) with an utilisable reservoir capacity of 1.000 l • Rear pump type FP 10/10 JOEHSTADT, driven over PTO with double piston deaeration • On / Off switch at the pump control stand • 2 pressure outlets B • 1 pressure outlet C for first strike |
| Miscellaneous: | 6-gear manual transmission, ASS, registered in 2000, revarnished with RAL 3000, 2 blue rotating lights with siren type FIAMM, chassis technically reconditioned and tested, 1 year guarantee |
| Optional: | 2 storages for SCBA at the crew cabin contrary driving direction, Storage for generator 5 kVA, Lighting mast pneumatic with 2 floodlights and wiring to the generator, Surround lighting above each roller blind, Supply and installation of 2 front flashlights, Supply and installation of a 3rd rotating light at the rear, Roof case of aluminium with cover and gas spring (length 2.500 mm), Charging station for portable pump with converter, Compressed-air connection at the cabin entrance, Installation of a provided wireless transmitting set 4 m band including accessories and loudspeakers at the pump stand and the crew cabin, Supply and installation of a first strike reel with 50 m rigid hose S25, 2 pressure outlets B installed at the substructure cabinet on the right hand and left hand side, Storage for pressure aerator, Storage for 3part sliding ladder, Optional labelling and foil bonding (will be charged on T&M basis) |
